Chip Trapper™
|
 |
|
 |
What Is The Chip Trapper?
Back To Top
The new Chip Trapper™ (patent pending) offers a fast, easy way to clean chips, swarf and shavings out of used coolants and other liquids. The Chip Trapper vacuums the coolant or liquid that is filled with debris and traps all the solids in a reusable filter bag. Only the liquid pumps back out. It is ideal for use on machines with sumps, parts washers, tanks and storage containers of contaminated liquids.
The Chip Trapper uses EXAIR's compressed air powered Reversible Drum Vac (included) that can fill or empty a 55 gallon drum in less than two minutes. Simply set the Reversible Drum Vac pump and directional flow control valve on top of the drum to "fill" for it to quickly vacuum the liquid with solids. Once the sump, pit or tank is empty, set the pump and directional valve to "empty" for it to pump out clean coolant/liquid. All the chips and other solids are trapped inside the reusable filter bag of the Chip Trapper.
Why The Chip Trapper?
|
Anwendungen
Back To Top
|
Chips can accumulate in the sump, restricting coolant flow. |
The Chip Trapper pumps the coolant back into the sump—free of chips and debris. |
Vorteile
Back To Top
|
The 5 micron filter bag traps all the chips so no solids get pumped back out of the drum. |
The Chip Trapper includes the pump assembly with directional flow valve, a 55 gallon drum, 10' (3m) chemical resistant hose, 20' (6.1m) compressed air hose, aluminum chip want, (2) reusable 5 micron filter bags and drum dolly. |
How the Chip Trapper Works
Back To Top
The vacuum hose (1) is attached to the barbed connection of the Chip Trapper (2). The directional flow control valve on top of the durm (3) and know on the pump (4) are set to the "fill" position. The air supply valve is opened to permit compressed air at 80-100 PSIG (5.5 - 6.9 BAR) to flow throught the pump which pulls the liquid through the hose, then into the reusable filter bag (5). When all liquid is in the drum, the air supply is turned off. The filtered liquid can then be pumped out by setting the directional flow control valve on top of the drum and knob on the pump to the "empty" position. Once the air supply valve is opened, the air pushes the liquid back through the hose while all solids remain in the reusable filter bag.
Chip Trapper Specifications
Back To Top
| Pressure Supply | Air Consumption | Water Flow Rate | ||||
|---|---|---|---|---|---|---|
| Model | PSIG | BAR | SCFM | SLPM | GPM | LPM |
| 6198 | 80 | 5.5 | 19 | 538 | 30 | 114 |
The filter bag provides 5 micron filtration.
Chip Trapper Models
Back To Top
BSP Threads Available - Contact Distributor
| Model # | Description |
|---|---|
| 6198 | Chip Trapper includes the Reversible Drum Vac pump assembly, directional flow valve, 55 gallon drum, lever lock drum lid, shutoff valve, 10' (3m) flexible vacuum hose (1-1/2"/38mm I.D.), 20' (6.1m) compressed air hose, chip wand, (2) filter bags and drum dolly. |
Zubehör
Back To Top
| Model # | Description |
|---|---|
| 901060 | Replacement filter bag, 5 micron |
| 6901 | Spill Recovery Kit includes a one-piece 54" (1372mm) ABS wand and 14" (356mm) double blade squeegee tool |
| 9001 | Auto Drain Filter Separator, 38 NPT, 65 SCFM (1841 SLPM) |
| 9005 | Oil Removal Filter, 38 NPT, 15 - 37 SCFM (425 - 1048 SLPM) |
Installations und Gebrauchsanweisungen
Back To Top
These files are in the Adobe .PDF format.
The viewer is free and is available at
www.adobe.com.
Eputec Drucklufttechnik GmbH▪ Haidenbucherstraße 1 ▪
86916 Kaufering ▪ Germany
Tel: +49/8191/91 51 19-0 ▪ Fax: +49/8191/91
51 19-19